Last Modified: 11-29-2007 1.6 A
Service Category: Audio/Visual/Telematics Section: Navigation/Multi Info Display
Model Year: 2008 Model: Sequoia Doc ID: RM000002ZUK006X
Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION RECEIVER: REMOVAL (2008 Sequoia)

REMOVAL

1. REMOVE FRONT DOOR SCUFF PLATE LH INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 Sequoia)+

2. REMOVE COWL SIDE TRIM BOARD LH INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 Sequoia)+

3. REMOVE INSTRUMENT SIDE PANEL LH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 Sequoia)+

4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 Sequoia)+

5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: REMOVAL (2008 Sequoia)+

6. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: REMOVAL (2008 Sequoia)+

7. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: REMOVAL (2008 Sequoia)+

8. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 Sequoia)+

9. REMOVE CENTER LOWER INSTRUMENT PANEL FINISH PANEL INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 Sequoia)+

10. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY HEATING / AIR CONDITIONING: AIR CONDITIONING PANEL: REMOVAL (2008 Sequoia)+

11. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH BRACKET



(a) Remove the 4 bolts.

(b) Pull the navigation receiver as shown in the illustration to disengage the 3 clips on the backside of the navigation receiver.

(c) Disconnect the connectors and remove the navigation receiver.

12. REMOVE NO. 2 RADIO BRACKET



(a) Remove the 4 bolts and bracket.

13. REMOVE NO. 1 RADIO BRACKET



(a) Remove the 4 bolts and bracket.